Replacing the Main Unit
Note: Be careful not to drop any equipment, tools, or screws if you are
working at height. Tools should be secured to belts or harnesses
if working at height.
10. Open the cable gland holding the optical cables.
Note: Ensure that all cables are labeled before disconnecting them.
Ge2667A
11. Remove the optical cables by unplugging them from the Small form Factor
Pluggable (SFP) modules.
Note: Never touch the end face of the optical connectors. Protect from
dirt or grease that can damage fiber optic cables. Too much or
careless bending may damage the cable. The minimum allowed
bending radius can be found in
Installing Optical Cables for
Main-Remote Solutions.
11
81/1543-LZA 701 6001 Uen B | 2012-11-09
To Next Page
Loading...
