Ericsson RBS 6302 - Dual Unit Back-to-Back Wall Installation Removal

Replacing the Main Unit
Ge2680A
7. Continue the procedure in Section 2.1.7 on page 34.
2.1.5 Removal from a Dual Unit Back-to-Back Wall Installation kit
To remove the main unit, preform the following procedure:
1. Loosen the five captive screws holding the back-to-back plates using a
T25 Torx screwdriver.
27
81/1543-LZA 701 6001 Uen B | 2012-11-09