Ericsson RBS 6302 - Concluding Removal Procedure; Installing the Main Unit

Replacing Main Unit
Ge2679A
4. Continue the procedure in Section 2.1.7 on page 34.
2.1.7 Concluding procedure
1. Remove all SFP modules from the optical connectors.
2. Unscrew and remove the mounting brackets, and bolts from the main unit
using a wrench fitted with a 16 mm socket.
3. If applicable, remove the GPS receiver unit, as described in Section 3 on
page 35.
4. If applicable, remove the Power Supply Unit (PSU) AC, as described in
Replacing Power Units.
2.2 Installing the Main Unit
The main unit installation procedures can be found in Installing RBS.
34
81/1543-LZA 701 6001 Uen B | 2012-11-09