Replacing the Main Unit
Ge2276A
23. Attach a lifting device to the top of the pole or wall, where the main unit
is to be attached to.
Ge2097A
24. Pull a rope through the block on the lifting device, and attach the end of the
rope to the handle of the main unit. This rope is for lowering the main unit.
Attach another rope to one of the stands on the main unit. This rope is for
guiding the main unit to prevent it from hitting the pole, wall, or other units.
Select one of the following scenarios and perform the continuing procedure in
the section indicated:
• For removing the main unit from a single unit pole installation kit, see
Section 2.1.2 on page 18.
17
81/1543-LZA 701 6001 Uen B | 2012-11-09
To Next Page
Loading...
