erlab Captair Flow Smart - General Information; Safety Notices; Product Registration

3
General
Choosing Captair Flow Smart ductless ltering clean-air enclosures is choosing an effective and responsible pro-
tection for your handlings.
Erlab’s 50 years of expertise in the ltration systems for laboratories ensures the highest protection for handlings requiring an
ultra clean environment. The new Captair Flow Smart ductless ltering clean air enclosure uses an innovative and straight-
forward mode of communication called Smart technology. This powerful interface uses light to intuitively and effortlessly
communicate with users and leave them free to focus all their attention on the main task: their application.
Captair Flow Smart ductless ltering clean-air enclosures are designed to provide an ultra-clean and dust free workstation.
It features a high efciency system with HEPA H14 (or ULPA U16) ltration technology to achieve an ISO class 5* work envi-
ronment according to the ISO 14644-1 standard.
The system’s connectivity allows for real-time safety alerts and individual device usage reports to be sent via the e-Guard
App.
*Considering a room pollution of up to ISO 9
Safety notices
Proper use, monitoring and maintenance of the device by users will assure its effectiveness. Your laboratory may also be-
net from ergonomic, economic and ecological advantages provided by the Captair Flow Smart throughout its life cycle.
• The equipment provided is not intended to be used in an explosive atmosphere.
• The lters delivered with this device must be removed from their packaging and positioned correctly.
• Erlab recommends that the electronic anemometer is calibrated at least once a year.
• New lters must be stored in their packaging, kept in a dry location. (see recommendations for storing and using the
lters)
Product registration
Take full advantage of the device’s connectivity to enhance your safety
Get up to 10 years warranty on your connected Erlab unit
Register your product online: the registration of the product will automatically give you one extra year of warranty (in addition
to the warranty mentioned in the Erlab’ general terms and conditions of sale).
Connect your unit: Once the device is connected to the Internet and congured to exchange usage data, the warranty is
extended for up to 10 years. Warranty will be successively renewed at each lters replacement and for the life time indicated
on the Valipass® and/or or at the end of lter usage time.
In order to benet from Erlab extension of warranty offer, the following conditions shall be respected:
Warranty applicability is subject to the respect of the Erlab’ general terms and conditions of sale and following requirements:
• The registration and/or the connection of the product shall be performed within the twelve months from the purchase
date;
• Filters replacement must be performed following Valiquest® service recommendations or at the end of lter usage
time; The lter’s serial number, used as an identication key, validates this condition, regardless of your device’s
supplier (and/or the replacement lter’s supplier for the following years);
• The device’s replacement lters must be manufactured by Erlab, as must all other spare parts.
Consumables such as lters and saturation sensors are not covered under warranty.