Need help?Do you have a question about the erlab Captair Flow Smart and is the answer not in the manual?
Important precautions for device usage and maintenance.
Steps to register the product for warranty benefits.
Initial setup, including anemometer calibration and default settings.
Understanding the controller interface and interpreting alarm signals.
Using the eGuard App and understanding network connectivity principles.
Procedure for resetting network settings if forgotten.
Overview of the three methods to connect to the Smart Portal.
Steps for connecting the unit via Ethernet to a computer.
Configuring TCP/IPv4 settings to enable interface access.
Steps to resolve "Page is not accessible" errors.
Description of the administrator interface and its status page details.
How to modify and update device settings like date, network, fan, and filters.
Detailed explanation of each setting available in the interface.
Instructions for accessing and exporting the device's event log.
Table showing fan speed setpoints for different filtration column types.
Summarizes possible FLEX filter configurations and available filter types.
Detailed procedure for replacing HEPA/ULPA filters, including safety.
Visual aids for the filter replacement procedure steps.
Instructions for assembling filter columns for specific workstation models.
Instructions for assembling filter columns for specific workstation models.
Recommendations for storing filters and their replacement frequency.
Information on the Molecode option and its replacement interval.
Chart detailing maximum load capacities for different work surfaces.
Checks for hinges and acrylic parts for proper function and transparency.
Methods for cleaning the enclosure using soapy water or neutral products.
Inspection of metal parts for corrosion and cleaning the spill tray.
Focus on molecular filtration and product development.
Adherence to AFNOR NF X 15-211:2009 filtration safety standard.
Importance of chemical listing for compliance and filter testing.
Erlab filters undergo independent testing for performance and safety.
Service to recommend appropriate hoods and filters based on application.
Validation of chemicals approved for use in the hood.
Erlab's commitment to product support, evaluation, and safety specialist services.
General| Dimensions | Varies by model |
|---|---|
| Filter Type | HEPA, ULPA, or activated carbon filters |
| Control System | Smart Technology |
| Standards | NF X 15-211 |
| Power Supply | 220V |
| Weight | Varies by model |
| Energy Consumption | varies by usage |
| Certifications | CE |
To Next Page