6. Stability delay
The time period for displayed weight values, for determination of the
stability.
( Accepted values: 1 .. 5 second(s) )
7. Filter
This value determines the interpretation of the changes in weight. A lower
value causes fast reactions to weight changes and is suitable in relatively
stable conditions. A higher value causes slow reactions but the vibrational
flickers are eliminated.
( Accepted values: 1 .. 5 )
8. Zero at power-on
This setting determines if the indication is set to zero automatically at
power on. (initial zero setting)
( Accepted values: 0 (off) , 1 (on) )
v1.00 Page 12
To Next Page
Loading...