2.2 Keypad
Zero key: Set the indication to zero. Zeroing can be established only if the gross weight
is within ±2% of the maximum capacity.
Tare In / Tare Out key: If the indicated value is positive and stable, it is saved as tare
and net weight is indicated. If there is already a tare device in operation, it is cancelled
and gross weight is indicated.
Print key: If the indicated value is positive and stable it is saved as a weighing result
and a print out is produced (if configured).
Star key: Call up the configuration menu. Please refer to the configuration section.
Function key: Activates and deactivates a configured function. For a complete
explanation refer to the related section of this manual.
Note: For an explanation of the function of the keys while editing numerical values please refer to the
configuration chapter.
v1.00 Page 6
To Next Page
Loading...