6.2 Specifications
Power Supply
85 – 264 VAC, 50/60 Hz, maximum 15 Watt
Enclosure Stainless Steel
Display 6 digit, 25 mm bright red display
Interval, zero, stability, net, unit and function indications
Keypad 5 mechanical keys
(Zero, tare / tare cancel, print and function keys)
Loadcell 4 or 6 wires
Excitation Voltage: 5V DC
Impedance : 43 ... 1100 Ω (Ex: 8 x 350 Ω)
Cable Length : Maximum 350m (≥0.75mm², 6 wire cable)
Analog
Specifications
OIML Class III 3000e, Class IIII 1000e, single range / multi range
Industrial applications 40000e
Minimum input-voltage per verification scale interval: ≥0.8μV/e (approved)
≥0.2μV/e (industrial)
Input Signal Range: 0 ... 20 mV
Measurement Method: Delta-sigma A/D, 20ms ... 1s update rate
Internal Resolution: 6,700,000 adım
Linearity: <0.007%
Interfaces RS-232 serial port
USB connection (PC)
ERTE HG External Display
Environmental Operating Temperature: -10°C ... +40°C
Storage Temperature: -30°C ... +80°C
Electromagnetic Compatibility:IEC 61000-4-2 (Electrostatic discharge)
IEC 61000-4-3 (Radiated radio frequency field)
IEC 61000-4-4 (Electrical fast transient burst)
EN 55011 (Emmision)
Dimensions 210mm (width) x 185mm (length) x 110mm (height)
Approvals
EU Directive EN45501 , EMC - EN 61326-1:2006 and EN 55011:2007
v1.00 Page 19
To Previous Page
Loading...