ESAB ESP-200 - 4.4.4.3 Stainless Steel Cutting Data (PT-26)

52
SECTION 4 OPERATION
Material
Type-Thickness
in.(mm)
Current
(Amps)
Travel
Speed
ipm(M/m
Shield Gas
Type/Pressure
psi(bar)
Height
in.(mm)
Plasma Gas
Type/Pressure
psi(bar)
Start Gas
Type/Pressure
psi(bar)
4.4.4.3 Stainless Steel Cutting Data (PT-26)
SS- 6,35 (1/4) 200 3,8 (150) 7,9 (5/16) Air - 2,76 (40) Air - 4,14 (60) Air - 3,45 (50)
SS- 9,5 (3/8) 2,87 (113)
SS- 12,7 (1/2) 2,16 (85)
SS- 15,9 (5/8) 1,6 (63)
SS- 19,1 (3/4) 1,27 (50)
SS- 25,4 (1.0) 0,68 (27)
SS- 31,7 (1-1/4) 0,33 (13)
SS- 38,1 (1-1/2) 0,25 (10)
SS- 44,5 (1-3/4) 0,13 (5)
SS- 50,8 (2.0) 0,08 (3)
SS- 9,5 (3/8) 200 1,19 (47) 7,9 (5/16) H-35 or N
2
H-35 - 4,83 (70) Air - 3,45 (50)
SS- 12,7 (1/2) 0,96 (38) 2,06 (30)
SS- 15,9 (5/8) 0,89 (35)
SS- 19,1 (3/4) 0,81 (32)
SS- 25,4 (1.0) 0,5 (20)
SS- 31,7 (1-1/4) 0,33 (13)
SS- 38,1 (1-1/2) 0,3 (12)
SS- 44,5 (1-3/4) 0,2 (8)
SS- 50,8 (2.0) 0,15 (6)