59
SECTION 5 MAINTENANCE
ELECTRIC SHOCK CAN KILL!
OPEN WALL DISCONNECT SWITCH BEFORE ATTEMPTING ANY MAINTE
NANCE ON:
plasma console•
plumbing box•
plasma torch•
interconnecting cables•
WARNING
CAUTION
Only trained personnel should perform maintenance or repairs on
this equipment.
Frequent inspection and cleaning of the ESP-200 and related equipment are recommended for safety and proper operation.
Consider the following during inspection and cleaning:
Check work cable to workpiece connection.•
Check safety earth ground at workpiece and at power source chassis.•
Check heat shield on torch. Replace if damaged.•
Check torch electrode and cutting nozzle for wear daily. •
Ensure cable and hoses are not damaged or kinked.•
Ensure all plugs, ttings, and ground connections are tight.•
Check screen lter in coolant pump (located inside console) periodically and ush as required.•
5.2 Inspection and Cleaning
5.1 General
Location of
pump lter
To Next Page
Loading...
