ESAB ESP-200 - SECTION 4 OPERATION; 4.1 Introduction - Operational Safety

35
SECTION 4 OPERATION
ELECTRIC SHOCK CAN KILL!
DISCONNECT CURRENT SUPPLY AT WALL DISCONNECT BEFORE SER
VICING CONSOLE, TORCH OR PLUMBING BOX.
Do not operate console or plumbing box with any covers removed/•
open.
Do not touch any torch front-end parts with power on.•
Do not attempt to service any portion of this plasma system unless •
power has been disconnected at the wall disconnect.
4.1 Introduction – Operational Safety
DANGER
THIS EQUIPMENT CAN BE HAZARDOUS IF NOT PROPERLY OPERATED
AND MAINTAINED.
READ AND UNDERSTAND ALL EQUIPMENT LITERATURE AND WARN
ING LABELS BEFORE OPERATING THIS EQUIPMENT.
WARNING
WARNING
PLASMA ARC CUTTING CAN BE HAZARDOUS TO EYES AND EARS.
Wear hearing protection.•
Wear eye protection specically designed for arc welding and cutting. •
Lenses should be at least a No. 6 or No. 7 lens shade.
Wear protective clothing to avoid skin burns.•