Do you have a question about the Esaote mylab 25 gold and is the answer not in the manual?
Procedure for turning the MyLab ultrasound system ON and OFF.
Understanding battery status indicators and operational guidelines for battery use.
Entering patient data and selecting application, preset, and probe for a new exam.
Adjusting patient data, presets, and probes during an active examination.
Overview of the display areas: Heading, Image Area, and Software Keys.
Guidelines for cursor control and activation using the trackball in various modes.
Procedures for acquiring and optimizing 2D images using B-Mode controls and settings.
Activating and adjusting M-Mode for analyzing cardiac motion and timing.
How to activate, adjust, and optimize Color Flow Mapping and Power Doppler modes.
Activating and optimizing Pulse Wave (PW) and Continuous Wave (CW) Doppler modes.
Utilizing multi-view display formats and zoom functions for enhanced image viewing.
Procedure for freezing images and accessing the image memory scroll bar.
Saving still images and video clips in real-time or during freeze mode.
Accessing and viewing previously captured images and clips from saved exams.
Taking and recording measurements on images, including generic and application-specific types.
Activating, selecting, and positioning body marks on the ultrasound image for anatomical reference.
Adding free text or using word/sentence glossaries for image annotations.
Procedure for printing captured images to various connected printer types.
Steps to finalize an exam, including anonymization and saving data to different destinations.
Reviewing previously saved patient exams and images from the system's archive.
| Display Type | LCD |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Application | General Imaging |
| Display Size | 15 inches |
| Operating Modes | B-Mode, M-Mode, Color Doppler, Power Doppler |
| Probe Types | Convex, Linear, Phased Array, Endocavitary |
| Frequency Range | 1 - 18 MHz |
| Scan Modes | Convex, Linear |
| Storage Temperature | -20°C to 60°C |
| Humidity Range | 30% to 80% (non-condensing) |