10
User guide
Getting started
The built-in battery is partially charged in the factory for the purpose of testing. Before using the
Escape™ P9 for the first time, you have to completely charge the internal battery.
The battery will slowly discharge if:
it is not connected to the AC power
it is not used for several weeks
1. Open the protective cover from the AC power socket located at the bottom of the unit.
2. Connect the right-angle AC power cord to the three-prong outlet and insert the power cord
plug into an AC outlet.
The power LED light will be red, indicating that the unit is charging. The battery is fully charged
when the red LED is off.
3. Remove the right-angle AC power cord from the three-prong outlet and close the protective
cover.
5.3 Power LED - battery status indicator
The power LED light indicates the status of the internal battery.
Important: If you place the device on its
side to connect the AC power cord make
sure it is on a flat, clean surface. Placing the
unit on uneven surfaces or objects may
damage the grill.
1
2
LED appearance Battery status
flashing red for 3 seconds and white for 0.5
seconds
The battery charge has reached approximately
20%. The unit is not connected to a power
outlet and the battery needs to be charged.
solid red The unit is connected to a power outlet and is
charging.
white The battery is fully charged.
To Next Page
Loading...
