630298_3 EF5000 Installation Guide - US
16.0 Placement of ceramic stones:
EF5000 fuel beds should be evenly spread out with a maximum one layer of media. Do not
heap or mound the fuel bed media, but attempt to get an even spread across the top of the
burners.
16.1 UNDER NO CIRCUMSTANCES SHOULD THE SUPPLIED
SMALL STONE PEBBLES (RIVER STONES) BE PLACED ON THE BURNERS.
THEY ARE FOR USE INSIDE THE STONE CARTRIDGE ONLY.
SOLID FUELS ARE NOT TO BE BURNED IN THIS APPLIANCE
16.2 If desired, an optional Weather Cover can be purchased from your Escea retailer, which
protects the fuelbed and burners. This should be replaced when while the fire is not in use.
16.3 To fit the weather cover ensure fire is off and cooled, and place the front edge on the glass
at the front of the fire, the rear flange of the Weather Cover will rest on the burner supports
behind the rear burner. To remove, lift the Weather Cover upwards and then towards
yourself.
16.4 The fire MUST NOT be operated while the cover is fitted.
16.5 The cover MUST NOT be fitted while the fire is hot. A cooling period of 30 minutes must be
observed before fitting.
16.6 Objects such as wood, coal, fire logs or any other solid fuels shall not be burned in the gas
fireplace.
Under no circumstances should any objects enter the gas fireplace during the start-up or
whilst the fire is running.
To Next Page
Loading...
