Escea EF5000 - Adjusting Flame Height; Turning Off the Fire

630298_3 EF5000 Installation Guide - US
1.0 Product Description:
The Escea EF5000 flame effect gas fire is designed for outdoor use only.
This appliance requires no flue and must be permanently installed into a cavity.
It may be installed into a timber cavity.
The fire is controlled by the user, from a touch panel that is situated on the lower right hand
side of the stainless steel fascia, or if the ‘wall mount’ option is chosen, the remote will be
situated on the wall near the fire, connected by a cord.
The Data Plate, containing all technical information such as manufacture date, serial
number, gas type, jet size, etc, can be found in the lower right hand side of the fire, below
the firebox. To access this the fascia must be removed.
1.1 Product dimensions: (in)
25
3
/
8
”
50
7
/
8
”
2
3
/
8
” 12
5
/
8
”
18
3
/
16
”
22
13
/
16
”
39
3
/
8
”
12
5
/
8
”
2
3
/
8
”
Face of the Wall
454