Advanced Operation
2
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
AM
AM
1 2
ON
AM
PM
OFF
Remote One-Button Startup (Default)
To Turn on the Fireplace
Press the button until a
series of blinking lines and
two short beeps confirms
the fireplace has turned on.
The remote automatically
goes into Manual mode
after the main burner is lit.
Setting the Remote to Two-Button Startup
To change from one button startup to two button
startup press and hold the button for 10
seconds immediately after installing the remote
batteries. The word ‘ON’, and ‘1' is displayed.
When the process is complete the ‘1' will change
to ‘2'.
Remote Two-Button Startup
Press the and button
simultaneously until a series
of blinking lines and two short
beeps confirms the fireplace
has turned on.
The remote automatically
goes into Manual mode after
the main burner is lit.
Setting the Remote to One-Button Startup
To change from two button startup to one button
startup press and hold the button for 10
seconds immediately after installing the remote
batteries. The word ‘ON’, and ‘2' is displayed.
When the process is complete the ‘2' will change
to ‘1'.
To Turn off the Fireplace
Press and hold the button
until the word ‘OFF’ is
displayed on the remote.
Flame Height Adjustment
High and Low Flame Settings
To increase the flame height
press and hold the button
until the desired flame height is
attained.
To decrease the flame height or
set the fireplace to pilot flame,
press and hold the button until
the desired flame height/setting
is attained.
Note: The remote handset backlight must be on for
the following to work.
To go to a set low flame, double-
tap the button; will be
displayed on the remote screen.
To go to a set high flame, double-
tap the button; will be
displayed on the remote screen.
Countdown Timer
Setting the Countdown Timer
1. Press and hold the button
until is displayed and the word
‘hour’ flashes on the remote
screen.
2. To change the hour press the
or button.
3. To confirm, press the
button. The word ‘minutes’ will
now be flashing on screen.
4. To change the minute press
the or button.
5. To confirm, press the button
or wait.
Turning off Countdown Timer
Press the button; will
disappear along with the
countdown time.
Note: At the end of
the countdown timer
period, the fireplace
will turn off. The
countdown timer only
works in manual and
thermostatic modes.
The Maximum
countdown period is
9hrs and 50mins.
To Next Page
Loading...
