Advanced Operation
Setting Fahrenheit or Celsius
Child proof
Setting the Time
Contents
>
1
1
1
1
2
2
3
3
3
4
5
5
5
Manual Mode
Designated Low Fire and High Fire
Countdown Timer
Modes of Operation
Thermostatic Mode
Program Mode
Touch Pad Wall Switch
To Turn off Gas to Appliance
Automatic Turn Down
Automatic Shut Off
Installing the Batteries in the Receiver
5
Cleaning and Maintenance
>
8
Normal operating Sounds and Smells
Warrantee
>
>
11
12
Clearances
>
6
The ST900 electronic control system is designed to work within the
temperature range of 32°F to 176°F, with a humidity level that is non
condensing. This is to ensure safe operation of the electronic and
gas control system.
If the fireplace is subjected to an environment with temperatures
very close to or exceeding these temperature limits (irrespective of if
the fireplace is on or off at the time) the fireplace may not start up
until the temperature returns back to within the operating range.
To remedy this the environmental temperature should be addressed
and the fireplace control system given time to adjust accordingly.
The fireplace should then function correctly.
To Next Page
Loading...
