3
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
1 2
ON
AM
PM
OFF
Advanced Operation
Thermostatic Mode
The desired room temperature
is set by the user and the
fireplace adjusts its flame
height automatically to achieve
this desired room temperature.
Operation Modes
There are 2 independent
programmable channels, each
can be configured to turn the
fireplace on and off at specific
times at a set temperature.
Program Mode
Thermostatic Mode
To Turn on:
Press the button. Will be
displayed on the remote
screen and the desired room
temperature will be displayed
briefly, followed by the current
room temperature.
To turn off:
1. Press the button.
2. Press the or button to
change to Manual mode or
press the button to enter
Program mode.
Setting:
1. Press and hold the button
until is displayed and the
temperature flashes.
2. Press the or button to
set the temperature.
3. To confirm press the
button or wait.
Program Mode
To turn on:
Press the button. , 1 or 2, ON or
OFF will be displayed.
To turn off:
1. Press the or or button to
enter Manual mode.
2. Press the button to enter
Thermostatic mode.
Note: The temperature set in Thermostatic mode is the
temperature used for the ON time in Program mode.
Default settings:
ON time (thermostatic) temperature: 21ºC
OFF time temperature: ‘ ‘ (pilot flame)
Setting the Temperature:
1. Press and hold the button until
flashes. ‘ON’ and the thermostatic
temperature is displayed.
2. To continue press the button or
wait. , ‘OFF’ is displayed and the
temperature flashes.
3. Change the off temperature by
pressing the or button to increase
or decrease the temperature
respectively.
4. To confirm, press the button.
Note: The on (Thermostatic) and off set temperatures are
the same for each day.
Setting the Day:
5. flashes. Press the or
button to change between , ,
, , , , , .
6.To confirm press the button.
To Next Page
Loading...
