N O T E
The information in this document has been carefully checked and is believed to be entirely reliable.
esd electronics makes no warranty of any kind with regard to the material in this document, and
assumes no responsibility for any errors that may appear in this document. In particular
descriptions and technical data specified in this document may not be constituted to be guaranteed
product features in any legal sense.
esd electronics reserves the right to make changes without notice to this, or any of its products, to
improve reliability, performance or design.
All rights to this documentation are reserved by esd electronics. Distribution to third parties, and
reproduction of this document in any form, whole or in part, are subject to esd electronics's
written approval.
© 2020 esd electronics gmbh, Hannover
esd electronics gmbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone: +49-511-372 98-0
Fax: +49-511-372 98-68
E-Mail: info@esd.eu
Internet: www.esd.eu
This manual contains important information and instructions on safe and efficient
handling of the CAN-PN. Carefully read this manual before commencing any work and
follow the instructions.
The manual is a product component, please retain it for future use.
Trademark Notices
CANopen
®
and CiA
®
are registered EU trademarks of CAN in Automation e.V.
PROFINET
®
is a registered trademark of the PROFIBUS and PROFINET International (PI).
All other trademarks, product names, company names or company logos used in this manual are reserved by their
respective owners.
Page 2 of 38
Hardware Manual • Doc. No.: C.2920.21 / Rev. 1.4
CAN-PN
To Next Page
Loading...
