ESDEC Clickfit Evo - Tighten the Hanger Bolt

13
2 TIGHTEN THE HANGER BOLT
>50 mm
>50 mm
Bitumen roong insulated Corrugated roofs
>50 mm
>50 mm
Bitumen uninsulated / EPDM (insulated and
non-insulated)
Sheet steel
4
Makesureyouthatthehangerboltgoesintothestructurestraight(attherightangle).
4
Usethehangerboltwasher(articleno.1003070)onabitumenorEPDMroof.
Continuetostep3.6.