ESI ES2247B - Temporary Manual Overrides; The Advance Function; +HR Boost Function

The Advance Funcon
The ADVANCE funcon allows the user to move to the next ON/OFF
programme for a “one off” event, without having to change the
programme or use the ON or OFF buons.
NB: The ADVANCE funcon is only available when the programme is
in AUTO or ALL DAY operang modes and the slider must be
switched to RUN.
To Advance Central Heang
1. Press the Next buon unl the radiator symbol is displayed.
Press the ADV buon. This will turn the Central Heang ON if it is in
an OFF period and OFF if it is in an ON period. The word ADV will
appear to the le hand side of the radiator symbol.
2. It will stay in this state unl either the buon is pressed again, or
unl a programmed ON/OFF period commences.
To Advance Hot Water
1. Press the Next buon unl the tap symbol is displayed. Press
the ADV buon. This will turn the Hot Water ON if it is in an OFF
period and OFF if it is in an ON period. The word ADV will appear to
the le hand side of the tap symbol.
2. It will stay in this state unl either the ADV buon is pressed
again, or unl a programmed ON/OFF period commences.
Seng the Hot Water Programme
1. Move the slider to HW. Choose between 5/2, 7 day or 24 hr
programmer operaon (see page 6)
2. Press the Next buon. Press the Day buon unl the desired
day/block of days you want to programme is flashing.
3. The display shows the 1st ON me. Press +/- to set the me (10
minutes increments). Press the Next buon.
4. The display shows the 1st OFF me. Press +/- to set the me (10
minutes increments). Press the Next buon.
5. The display will now show the 2nd ON me. Repeat steps 3-4 unl
all remaining ON/OFF periods have been set. On the last OFF
period, press the Day buon unl the next desired day/block of days
you want to programme is flashing.
6. Repeat steps 3-5 unl all days/block of days have been
programmed. Wait 15 seconds to automacally confirm ore press
the Home buon. Move the slider to RUN to return to Run Mode.
N.B. The copy buon can be used in the 7 day seng to copy any
chosen day to the next day (e.g Monday to Tuesday or Saturday to
Sunday). Simply change the program for that day, then push copy
repeatedly unl all 7 days (if you so wished) have been changed.
Seng the Operaon
1. Switch the slider to PROG. Press either the +/- buon to move
between ON/OFF/AUTO/ALL DAY. Press the Next buon to
move between the 3 channels.
ON : Central Heang and Hot Water is ON connuously
AUTO: Central Heang and Hot Water will be switched ON
and OFF in accordance with set programmes
ALL DAY: Central Heang and Hot Water will switch ON at
the first ON and switch OFF at last OFF
OFF: Central Heang and Hot Water will be permanently OFF
Temporary Manual Overrides
8
2. Wait 15 seconds to automacally confirm or press the Home
buon. Move the slider to RUN to return to Run Mode.
The +HR Boost Funcon
The +HR funcon allows the user to have up to 3 hours of extra
Central Heang or Hot Water, without having to change the
programme.