Esko Kongsberg X44 User Manual

12
Kongsberg X-series
12.8.6. Milling advice
Follow this advice for obtaining the best possible milling results.
Milling bits
For thin materials, use bits with short cutting
length.
For best performance and minimum wear, do not
let the bit stick out more than necessary .
101

Esko Kongsberg X44 Specifications

General

Connectivity	Ethernet, USB
Accuracy	±0.1 mm
Maximum Material Thickness	50 mm
Tool Options	Creasing Wheel
Working Area	2, 500 x 1, 600 mm
Speed	Up to 43.3 inches per second
Positioning Speed	up to 80 m/min
Software Compatibility	Esko Software
Power Requirements	230 V / 400 V