18
Kongsberg X-series
Intended Use
The TakeUp Unit is only intended to be used for winding up media.
Any different or additional use of the machine is considered improper and Esko is not responsible for
any resulting damage to machine or individuals.
Intended use does include:
• Following all instructions in this manual.
• Carrying out inspection and maintenance operations.
Safety Features
• Before start-up of the machine, make sure that all safety features are properly installed and
operational.
• Safety covers may only be removed and replaced when the machine is at a complete stop and
powered down.
Informal Safety Measures
• The user manual must be kept with the machine.
• In addition to the operating instruction, the local accident prevention regulations and
environmental regulations should be available.
• All safety instructions and warning pictograms must remain in legible condition.
Security Measures for Normal Operation
• Only operate the machine if all safety features are fully functional.
• Before start-up of the machine, ensure that no other individuals are to be at risk.
• Check the machine for obvious damage and the safety features being functional at least once every
shift.
• Only operate the machine if all gauges and warning lights are fully functional.
Dangers Caused by Electricity
Maintenance on the electrical system should only be carried out by qualified mechanics
18.4. Features and components
Components overview
187
To Next Page
Loading...
Need help?
General
