HARD DRIVE SETUP
OVERWRITE ENABLED YES
MASTER HDD SIZE 400MB
MASTER HDD USED 0MB 0%
MASTER HDD FORMAT
SLAVE HDD SIZE N/A
SLAVE HDD USED N/A
SLAVE HDD FORMAT
PRESS (<,>) THEN (SELECT)
PRESS (MENU) TO EXIT
Hard Disk Drive Setup Menu
Operation Guide: OVER WRITE
“YES”. The DVR will record continuously and overwrite the recorded data when the HDD is full.
“NO”. The unit will stop recording once the HDD is full.
Use ▼ and ▲ to select OVERWRITE ENABLED.
Press to choose YES/NO.
Press to return to the SUB menu.
Operation Guide: HDD SIZE AND HDD USED
Displays the storage capacity of the Master (and if installed the Slave HDD) and the amount of
Storage used.
Operation Guide: HDD FORMAT
Use the▼ and ▲ buttons to select the “HDD Format” option
Use the button to select the format option.
The system prompts for a password. If the password is accepted the format will commence and
delete all images stored on the selected HDD.
If an incorrect password is entered the system will display a message showing “Password
Incorrect” and return to the Hard Drive Setup menu.
To Next Page
Loading...
