2.2.3.
Test Module
Figure 2-4: ESP-LAUNCHER Test Module Schematics
2.3.
Test Board
A test board is embedded on ESP-LAUNCHER as shown in Figure 2-5. The external size of the
test board is 20 mm x 31 mm. An 2 dBi SMA antenna or other testing equipment can be
connected with the test board via the SMA antenna connector. The spacing of inserting
needles on the test board is 2.54 mm, which can be easily inserted into breadboard for testing.
Figure 2-5: ESP-LAUNCHER Test Board
To Next Page
Loading...
