Auto off and Slide
AUTO OFF: it is changed to "Light-Off" mode when the system doesn't operate for specific time period and
the mode is changing back to "System-On" when the remote starts working again.
TIME MODE: the system can be set to be off by every 5-minute, 10-minute and 15-minute.
SLIDE: when the system keeps silence without any use for specific time period, it is changing to "Light-Off"
or "Auto Image Slide Show" mode.
SLIDE MODE: the system can be set to be off by every 5-minute, 10-minute and 15-minute with following
instruction.
1. Select the "Auto Off & Slide" bar and then push the "SEL" key on the set mode.
2. Like the picture shown, you can choose the feature via "Up & Down" key on the environment setting
screen.
3. If the "ESC" key is pressed two times, the save message will pop up.
4. If operator want to save he has to push the "SEL" key.
> The screen is updated.
Clock dial and Phoria
Clock dial: is a mode showing various visual charts depending on user's preference, the 3
rd
radiation chart is
set as a default.
7 kinds of clock charts are selectable.
To Next Page
Loading...
Need help?
General