What to do if my Essilor Instruments CS POLA 600 Monitor doesn't respond to the remote control?
If your Essilor Instruments Monitor isn't responding to the remote control, there are a couple of potential causes. First, the IR detector might be dirty, so try cleaning it. Alternatively, the batteries in the remote might be dead; in that case, replace them.
General| Brand | Essilor Instruments |
|---|---|
| Model | CS POLA 600 |
| Category | Monitor |
| Language | English |
Product malfunction due to interference, publication accuracy, manufacturer liability.
Automatic visual chart system, LCD panel, remote control, chart types.
Equipment class, shock protection, water ingress, sterilization, mode of operation.
CB Scheme and CE certification marks.
Safety responsibility, familiarization with manual, safety notices, accessory standards.
Use for determining patient objective refraction.
IEC symbols for power, safety notes, current types, earth connection, manufacturer, compliance marks.
Avoidance of water vapor, direct sunlight, extreme temperatures, heat, humidity, shocks, chemical exposure, dust, disassembly.
Symbols for rain, temperature, humidity, pressure, fragility, orientation, stacking limit.
General safety, usage restrictions (explosion, flammable solvents), humidity limits, avoiding liquids.
EMC standards compliance, interference, wireless devices, RF emission, harmonic emission, voltage fluctuation.
ESD, electrical fast transient, surge, voltage dips, power frequency magnetic field immunity.
Reverses Red/Green charts using Black & White button.
Makes child concentrate during tests.
Adjusts contrast for low contrast conditions and sensitivity levels.
Enables testing in bright/dark places for specific patients.
Stops test errors by memorizing types/directions, allows chart changes.
Adjusts Red/Green filter concentration from 0 to 31 steps.
Allows installation in narrow spaces for user convenience.
Rotates clock dials, reverses Black & White.
Instrument damage from impact, handle with care.
Protect product from vibration.
Exposure affects measurement results.
Avoid organic solutions that can damage the product.
Disconnect power and consult dealer for smoke, odors, or noise.
Verify chart is safely tightened when hung.
Overview of LCD screen, IR cover, power switch, ports, ventilation, and mounting hole.
Detailed list of remote control buttons and functions like masking, movement, and optotype selection.
Explains functions like masking, optotype selection, contrast adjustment, and slide functions.
Details about the lithium battery, capacity, and voltage.
Steps to securely mount the product on a wall using the bracket.
Positioning the LCD screen at the patient's eye level for optimal viewing.
Navigating the CHART SYSTEM CONFIGURATION menu for various settings.
Connecting the remote control via USB to configure settings.
Steps to select, save, or cancel configuration changes.
Matching remote control channel with LCD channel to prevent communication errors.
Adjusting measurement distance and pointing type (circle/square).
Instructions for using circle point and square rectangle pointing functions with the remote.
Selecting optotype modes (Numeral, Snellen, English, Korean) and number type (round/square).
Selecting chart display types (Decimal, Feet, Meter) and units.
Adjusting Red/Green color balance and density steps.
Adjusting backlight brightness and beep sound volume.
Setting automatic backlight-off timer and slide show intervals.
Selecting clock dial display modes and phoria test types.
Selecting radiation charts, cross phoria charts, and setting defaults.
Configuring mirror mode for limited space and Pola function.
Selecting communication mode for system operation, default is LINK1.
Saving specific visual acuity charts for sequential display.
Checking binocular accommodation balance using Red/Green filter.
Checking for suppression and blending using Red/Green filter.
Checking aniseikonia of right or left eye using Red/Green filter.
Testing horizontal/vertical phoria using Red/Green filter.
Measuring vertical/horizontal phoria and fixation disparity using Red/Green filter.
Measuring vertical/horizontal phoria of right or left eye using Red/Green filter.
Detailed instructions for clock dial, Schober target, chart point, eye movement, animation, contrast sensitivity.
Diagram and explanation of remote control buttons and their functions.
Selecting functions like eye movement, animation, contrast adjustment, and color blindness charts via the slide button.
Instructions on how to recharge the remote control using a USB adapter.
Steps to upgrade the unit using a USB key.
Creating a 'Slide' folder and saving images for automatic slide show.
Adjusting brightness for quality and avoiding burn-in by turning off when not in use.
Checking consumable parts, avoiding scraping/pressing the panel, and proper cleaning.
Resolving issues like the product not turning on or responding to the remote control.
Temperature, humidity, and atmospheric pressure requirements for normal operation.
Temperature, humidity, and atmospheric pressure limits for transportation and storage.
Details on LCD type, resolution, chart window size, brightness, charts, view distance, memory, power, communication, dimensions, weight.
Lists standard and optional accessories, including remote control, cables, adapters, stands, and glasses.
Includes remote control, cables, adapters, power supply, wall bracket, and user manual.
Includes desktop stand, floor stand, Red/Green glasses, and polarizing glasses.
Steps to follow for troubleshooting and contacting distributors for issues.
Details needed when contacting for repair, including instrument name and serial number.
To Next Page