Essilor Instruments SL 650 User Manual

U SER MANUAL > M AINTENANCE
2. Cleaning
1. Objective lens
2. Reflecting mirror
1. Rail
2. Shaft
3. Slide plate
1. Storage and handling condition
Respect the operating, storage and transport conditions noted below.
Avoid condensation conditions.
Temperature
Humidity
Atmospheric pressure
Use
[5°C ; 40°C]
≤ 90%
[800hPa ~ 1060hPa]
Storage
[-40°C ; 55°C]
≤ 90%
[800hPa ~ 1060hPa]
Transport
[-40°C ; 55°C]
≤ 90%
[800hPa ~ 1060hPa]
The replaced waste materials should be treated as industrial,rubbish.
a. Lens and reflecting mirror
If there is any dust on the lenses or reflecting mirror, wipe it off with soft cotton dipped in absolute alcohol.
Don't wipe with hands or hard object or any corrosive detergent lest that the surface should be damaged.
b. Sliding pad, rails and shaft
Clean these parts with clean soft cloth regularly to ensure the stable movement of slit lamp.
c. Cleaning and disinfecting the plastic parts
Clean the plastic parts such as chinrest bracket, forehead rest* belt with soft cloth dipped in soluble detergent or
water, and then disinfect these parts with medicinal alcohol.
Do not wipe with any abrasive cleaner to avoid damaging the surface.
*: Applied part
d. Cleaning cycle
The slit lamp microscope should be used in a relatively clean environment, and the main parts that need to be
cleaned are as specified in the user manual.
38 SL650L - Slit lamp microscope > V1 - 10-2021 - CE

Essilor Instruments SL 650 Specifications

General

Brand	Essilor Instruments
Model	SL 650
Category	Measuring Instruments
Language	English