Essilor Instruments SL 650 - How to Adjust the Inclination of the Illumination Part; How to Replace the Rail Cover

U SER MANUAL > M AINTENANCE
c. How to adjust the inclination of the illumination part
1
If the inclination mechanism of the illumination part is too loose, fasten the screw on both sides of the
pivot point with the screw driver.
Screw
d. How to replace the rail cover
1
Place your hand on the rail cover.
2 Pull the rail cover outwards to see an obvious gap.
SL650L - Slit lamp microscope > V1 - 10-2021 - CE 41