Programming
Parameter Descriptions and Specifications
Braces { } indicate default settings.
Active When Functions Disabled by Password or Remote
Key Switch
This parameter selects the combination of the LSRA Reset, Alarm
Silence, Trouble Silence, and Drill switches that are operable when the
functions are DISABLED by password or remote key switch. Valid
options are:
• Reset
• Alarm Silence
• Reset and Alarm Silence
• Trouble Silence
• Reset and Trouble Silence
• Alarm Silence and Trouble Silence
• Reset, Alarm, and Trouble Silence
• Drill
• Reset and Drill
• Alarm Silence, and Drill
• Reset, Alarm Silence, and Drill
• Trouble Silence and Drill
• Reset, Trouble Silence, and Drill
• Alarm and Trouble Silence, and Drill
• {Reset, Alarm and Trouble Silence, and Drill}
• No Key switch Installed
• None
Active When Functions Enabled by Password or Remote
Key Switch
This parameter selects the combination of the LSRA Reset, Alarm
Silence, Trouble Silence, and Drill switches that are operable when the
functions are ENABLED by password or remote key switch.
The options that can be enabled by password are identical to those that
can be disabled by password or remote key switch.
Annunciation Type(s) (FCC Only)
A filter that defines the type of message(s) to be displayed on the
selected LSRA. Valid options are:
• Alarm
• Supervisory
• Alarm and Supervisory
• Trouble
• Alarm and Trouble
• Supervisory and Trouble
• Alarm, Supervisory, and Trouble
LSRA Installation, Operation, Maintenance, and Configuration Manual 4.23
To Next Page
Loading...