Programming
Program Installation
1. Insert the IRC-3 Data Entry, FCC Compiler, or LSS4
Configuration program disk in your computer. All these disks
include a directory called LSRA.
2. Create a new directory called "LSRA" on your hard disk. Copy the
contents of the LSRA directory from the IRC-3 Data Entry, FCC
Compiler, or LSS4 Configuration program disk to the LSRA
directory on your hard disk. The required key strokes are shown
below.
C:
MD\LSRA
CD\LSRA
A:
CD\LSRA
C:\LSRA
XCOPY A:*.* /S
3. After copying the contents of the LSRA configuration program
disk, the LSRA directory should contain the following files:
LSRAPGM.EXE, LSRA.BAT, and README.TXT, the OVL
directory and CONVERT.EXE. (Refer to the Convert.exe Utility
Program section for information about the CONVERT.EXE utility
program.) Additional files will be automatically added to the LSRA
directory when the program is used.
LSRA Installation, Operation, Maintenance, and Configuration Manual 4.3
To Next Page
Loading...