Programming
Screen Label and # Unacknowledged Messages
Total Messages (MSGS)
The total messages window shows the total number of messages
entered into the displayed LSRA's memory.
Transmit to Display
A command which downloads the configuration to the "selected
display."
Version
A command which displays the version number of the installed
CMDNPGM.EXE program.
XFER (FCC Only)
A command which transfers a copy of the data from the LSRA memory
indicated in the "Selected Display" window to the LSRA memory
indicated in the XFER window. This parameter is used to facilitate
LSRA configuration editing.
Zone
The zone address of the zone activating a message.
LSRA Installation, Operation, Maintenance, and Configuration Manual 4.27
To Next Page
Loading...