35
Etac / Cross 6 / www.etac.com
“Click”
“Click”
“Click”
Head support is mounted on a separate head support mount or
on a bow handle (optional). The head support is adjustable in height,
depth, angle and sideways and detachable.
Before adjusting the head support, make sure that the user
has a good sitting position and is seated rmly.
Check the wheelchair balance when the user leans his
head against the head support. Use of anti-tip guards
is recommended.
Crossbar is used when the back chassis needs to be reinforced.
Do not lift the wheelchair by the crossbar.
Head support mount is used for mounting head supports.
Do not lift the wheelchair by the head support mount.
14. Settings, accessories
To Next Page
Loading...
