EasyManua.ls Logo

ETQ PG30P11 - Generator Storage Guidelines

ETQ PG30P11
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ETQ
EASTERN TOOLS & EQUIPMENT INC
Web Site: easterntools.com
Storage
The generator should be started at least once eve r y
14 days and allowed to run for at least 20 minutes.
For longer term storage, please follow these
guidelines.
Engine Storage
1. Allow the engine to cool completely before
storage.
2. Clean the engine according to the instructions in
the Maintenance section.
3. Change the oil.
4. Remove the spark plug and pour about ½ ounce
of oil into the cylinder. Crank the engine slowly to
distribute the oil and lubricate the cylinder.
5. Reattach the spark plug.
Generator Storage
1. Allow the generator to cool completely before
storage.
2. Turn off the fuel supply at the fuel valve.
3. Clean the generator according to the instructions
in the Maintenance section.
4. Store the unit in a clean, dry area.
5. Store in a clean, dry place out of direct sunlight.

Table of Contents

Related product manuals