25809-02A
Unpacking and Inspection - 5
Unpacking and Inspection
The SolarForce® 652V arrives in eight boxes. For
ease of assembly, after inspection leave everything
in its original box until called for in the assembly
instructions.
Open each box and inspect the contents to make
sure they are free from any visible damage. Report
the extent of any damage to the transportation
company.
Note! The cartons are reusable. You may wish to
save them for future use.
As you unpack your boxes you should find the fol-
lowing:
• Right Module (box 1)
• Bag containing necessary assembly hard-
ware, and safety goggles (box 1)
• Left Module (box 2)
• Right Door (box 3)
• Left Door (box 4)
• Dome and ceiling assembly (box 5)
• Two blower assemblies (box 6)
• Base (box 7)
• Two Long Interior Handles (eighth box)
• Control Extrusion with keypad (eighth box)
Record the serial number of the Right Module in
the area provided at the back of this manual. This
information will be required if you ever need to
call customer service.
Tools Needed
You will need the following tools to assemble the
tanning booth.
Wrenches or ratchet wrenches
in 5/16” and 1/2” sizes
#2 Phillips screwdriver
Proper assembly of your booth requires at
least three people. Plan to have a few
helpers assist you.
CAUTION
To Next Page
Loading...
