31
2525462-01-01/20 (Translation of the original operating instructions)
Operating Instructions
Transponder-Coded Safety Switch CTM-LBI-BR
EN
13. Ordering information and accessories
Tip!
Suitable accessories, e.g. cables or assembly material, can be found at www.euchner.com. To order,
enter the order number of your item in the search box and open the item view. Accessories that can
be combined with the item are listed in “Accessories.”
14. Inspection and service
WARNING
Danger of severe injuries due to the loss of the safety function.
Ì If damage or wear is found, the complete switch and actuator assembly must be replaced. Re-
placement of individual parts or assemblies is not permitted.
Ì Check the device for proper function at regular intervals and after every fault. For information
about possible time intervals, refer to ENISO14119:2013, section 8.2.
Regular inspection of the following is necessary to ensure trouble-free long-term operation:
Ì Check the switching function (see chapter 10.3. Functional check on page 23)
Ì Check all additional functions (e.g. escape release, lockout mechanism, etc.)
Ì Check the secure mounting of the devices and the connections
Ì Check for soiling
No servicing is required. Repairs to the device are only allowed to be made by the manufacturer.
NOTICE
The year of manufacture is given in the laser marking at the bottom right corner. The current version
number in the format (V X.X.X) can also be found on the device.
15. Service
If servicing is required, please contact:
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
70771 Leinfelden-Echterdingen
Service telephone:
+49 711 7597-500
E-mail:
support@euchner.de
Internet:
www.euchner.com
To Next Page
Loading...
Need help?
General