EUFY L60 - Troubleshooting steps:; Check the suction power settings: The L60 is desig; Perform regular maintenance of your robot vacuum c; Check the type of flooring: Please note that for h

6
Troubleshooting steps:
 Check the suction power settings: The L60 is designed with a maximum suction power
of 5,000 Pa, which provides excellent cleaning capabilities. Please note that the robot
vacuum cleaner's default standard suction mode is 1,000 Pa, Turbo is 2,000 Pa; therefore,
if you have pets at home, it is highly recommended to adjust the suction power to the
maximum 5,000 Pa to ensure optimal cleaning results.
 Perform regular maintenance of your robot vacuum cleaner: For the robot vacuum
cleaner to maintain the best cleaning results, it is important to regularly clean the dustbin,
roller brush, side brushes, and filters. Please note that hair and debris can clog these
components, leading to reduced cleaning efficiency.
 Check the type of flooring: Please note that for high and thick pile carpets, the cleaning
performance of the robot vacuum cleaner may not work as expected. This is due to the
long fibers of the carpet that can entangle the roller brush to affect the cleaning
performance of the robot vacuum cleaner.
Maintenance tips:
 Empty and clean the dustbin regularly. After the robot vacuum cleaner completes each
cleaning cycle or when the dustbin becomes full, simply remove the dustbin from the
robot vacuum cleaner and empty it completely.
 Clean the roller brush periodically. It is important to check both ends of the roller brush
regularly for hair and debris. Please make sure to remove any entanglements and clean
the roller brush to ensure its cleaning performance.
 Inspect the side brush periodically. Please make sure the side brush is not damaged or
entangled with hair.