EUFY X8 Pro - Using Your RoboVac; Important Tips Before Use; Preparation; Charge Your RoboVac

06 EN EN 07
• Always keep the Self-Empty Station / Charging Base
plugged in, otherwise RoboVac will not automatically
return to it.
Charge Your RoboVac
• Make sure the power cord is connected to a power outlet.
• To preserve the battery's lifespan, recharge at least once
every 6 months.
• RoboVac will return to the Self-Empty Station / Charging
Base at the end of a cleaning cycle or when its battery is
running low.
• For T2276 only: If RoboVac has finished a round of
cleaning (more than 15 minutes), it will empty the dust
box automatically by default when it returns to the
Self-Empty Station. Make sure the dust bag is properly
installed.
Method 1: Attach RoboVac to the Self-Empty Station / Charging Base
by aligning its charging pins.
Method 2: Press on the main unit or tap the icon in the
eufy Clean app to send RoboVac to the Self-Empty Station / Charging
Base.
Auto Recharge and Resume
RoboVac returns to the Self-Empty Station / Charging Base
automatically to recharge when:
• RoboVac has finished cleaning;
• Cleaning is not complete and the battery level becomes low; once
recharged to 80% battery capacity, RoboVac will resume and finish
the remaining cleaning.
• Do not move the Self-Empty Station / Charging Base
during cleaning, otherwise RoboVac may fail to return
for recharge. If failed, you have to manually attach it to
the Self-Empty Station / Charging Base. If the Self-Empty
Station / Charging Base is moved, start cleaning from the
new location. RoboVac will automatically return when it
has finished cleaning.
Preparation
1
Remove the foam blocks beside the bumper before use.
2
Install the Self-Empty Station / Charging Base in a location that
RoboVac can easily access. It is recommended to place it against
a wall and on a hard, level surface.
• Do not place the Self-Empty Station / Charging Base on
carpets as RoboVac may fail to return to it.
3
It is recommended to remove objects within 1.6 ft / 0.5 m to
the left and right sides and within 4.9 ft / 1.5 m of the front of
the Self-Empty Station / Charging Base. If you cannot remove
the objects, move RoboVac to a new place and check whether
RoboVac can return to the Self-Empty Station / Charging Base
normally; if not, contact us at support@eufy.com for suggestions.
1.6ft/0.5m
1.6ft/0.5m
4.9ft/1.5m
4
Connect the power cord to the Self-Empty Station / Charging
Base and a wall outlet.
When the Self-Empty Station / Charging Base connects to AC
power, the LED indicator on it will be solid white.