Evco EVDRIVE03 User Manual

EVCO S.p.A. EVDRIVE03 | User manual ver. 3.7 | Code 144EPDE374
Page 16 of 76
4.3 Additional information for electrical connection
- do not operate on the terminal blocks of the device using electrical or pneumatic screwers
- if the device has been moved from a cold location to a warm one, the humidity could condense on the inside;
wait about an hour before supplying it
- make sure the power supply voltage, the electrical frequency and the electrical power of the device correspond
to those of the local power supply; look at chapter 11 “TECHNICAL DATA”
- disconnect the power supply of the device before servicing it
- do not use the device as safety device
- for the repairs and for information about the device please contact the EVCO sales network.

Evco EVDRIVE03 Specifications

General

Brand	Evco
Model	EVDRIVE03
Category	Control Unit
Language	English