Evco EVDRIVE03 User Manual

EVCO S.p.A. EVDRIVE03 | User manual ver. 3.7 | Code 144EPDE374
Page 7 of 76
analog input 4 (suction pressure probe)
0-20 mA /
4-20 mA /
0-5 V / 0-10 V
0-20 mA /
4-20 mA /
0-5 V / 0-10 V
0-20 mA /
4-20 mA /
0-5 V / 0-10 V
0-20 mA /
4-20 mA /
0-5 V / 0-10 V
Free of voltage digital inputs
digital input 1 (enable the operation / change
parameters set / resynchronization command
/ backup module status)
• • • •
digital input 2 (enable the operation / change
parameters set / resynchronization command
/ backup module status)
• • • •
High voltage digital inputs
on-off switching (enable the operation /
change parameters set / resynchronization
command / backup module status)
• • •
Digital outputs (electromechanical relays; res. A @ 250 VAC)
digital output 1 (alarm output / solenoid valve
/ resynchronization valve)
5 A 5 A 5 A 5 A
Communication ports
CAN port with CANBUS communication
protocol
• • •
RS-485 port with MODBUS communication
protocol
• •
programming port with MODBUS
communication protocol
• • • •
Codes
codes EPD4BX3 EPD4BC3 EPD4BF3 EPD4DF3
For further information look at chapter 11 “TECHNICAL DATA”; for further models please contact the EVCO sales
network.

Evco EVDRIVE03 Specifications

General

Brand	Evco
Model	EVDRIVE03
Category	Control Unit
Language	English