EVCO S.p.A. EVDRIVE03 | User manual ver. 3.6 | Code 144EPDE364
page 72 of 76
signalling LEDs.
128 x 64 pixel
single colour
(black with
rearlighting
through white
LEDs) LCD
graphic
display,
signalling
LEDs.
Digital outputs:
1 SPST 5 res. A @ 250 VAC (5 res. A @ 30 VDC) output
(electromechanical relay) which can be set via configuration
parameter as alarm output/solenoid valve/resynchronization valve.
Electromechanical relay
Maximum switching power: 1,250 VA (150 W).
Mechanical life: > to 5,000,000 operations.
Electrical life: > to 100,000 operations.
Protection: none.
The device ensure a reinforced isolation among each terminal of
the digital output and the remaining parts of the device.
Bipolar stepper motor output:
4 wires bipolar stepper motor output.
Bipolar stepper motor output
Input voltage: 21 VDC ±10%.
Output voltage: 27... 36 VDC (18... 24 VDC if
supplied by the backup module).
Maximum output current: 1 A.
Driver type: chopper (constant current).
Protection: none.
Type of actions and additional features: 1C.
Communication ports: EPD4BX3 EPD4BC3 EPD4BF3 EPD4DF3
To Next Page
Loading...
