44
Care and Cleaning
• DO NOT lubricate or immerse in water the LATCH
connectors, the buckle, or any other part of this
child restraint, unless rinsing is permitted, as stated
on the back of the buckle for your restraint.
• Plastic and metal parts may be wiped clean with mild
soap and water and dried with a soft cloth. Do not
use abrasive cleaners or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap and
water. Allow harness to air dry.
• Remove the EPS
foam from the
headrest pad
before washing.
See page 41.
Machine wash
the seat pad separately in cold water, delicate cycle.
Tumble dry 10 to 15 minutes on low heat.
• NEVER use child restraint without the seat pad.
• To protect the child restraint from damage caused
by weather, rodents, and other elements common to
garages, the outdoors, and other storage locations,
remove the seat pad and thoroughly clean the restraint
and pad prior to storage. Take care to clean in the areas
where crumbs and other debris tend to accumulate.
To help protect the
vehicle upholstery, place
a towel beneath and behind the
child restraint.
Tip!
Tip!Tip!
For future reference, record the model number of your
child restraint AND the date of manufacture below.
Model Number:
Date of Manufacture:
Fabriqué en
Manufactured in
Name / Nom
Model / Modèle
Made in / Fabriqué en
Expires on/Expire le
(année-mois-jour)
(
year-month-day)
Recording Model Information
To Next Page
Loading...
