45
Storing Your Instructions
After thoroughly reading and following
these instructions, store them in the
slots on either side of the child restraint.
When this booster seat reaches the expiration date
found on the date of manufacture label, Evenflo
encourages you to dispose of it properly. Most
components of this child restraint are recyclable.
1. Remove all fabric and padding.
2. Remove all screws and disassemble the restraint.
3. Recycle all fabric, padding, plastic, foam and metal
parts, if accepted by your local recycling center.
Responsibly discard the rest.
If your local recycling center won’t accept the
padding, you may dispose of it in the landfill.
To prevent injury due to hidden damage, lost
instructions, outdated technology, etc.,
discontinue use of this restraint after date on
the Date/Model label (below), OR if it has been
involved in a crash.
Proper Disposal of this Child Restraint
To Next Page
Loading...
