TimeFactor User Guide Typical Setups
10
Guitar > TimeFactor > Amp - Mono In/Mono Out
This is the simplest way to connect TimeFactor. Connect your guitar cable to TimeFactor Input
1 and a cable from TimeFactor Output 1 to your amp. Input and Output Level switches (In Lvl
& Out Lvl) should be set to GUITAR and AMP.
If you are using other stompboxes or pedals, it’s best to connect them in front of TimeFactor.
Connect TimeFactor’s Input 1 to the output of the last pedal. If TimeFactor’s peak LED lights
solidly, set TimeFactor’s In Lvl to LINE.
To Next Page
Loading...
