TimeFactor User Guide System Menu Tree
47
For Manual Select simply turn the Encoder to choose the MIDI Control Source. The choices
are:
BND – MIDI Pitch Bend
CC0 - C99 - MIDI Continuous Controller messages from 0 to 99.
To use the Learn Mode to select the external control source, Press the Right Footswitch again.
“LEARN” is displayed prompting you to send a MIDI message for automatic Control Source
assignment. Press the Right Footswitch again to exit LEARN mode and revert to manual
source selection.
Press the Left and Right Footswitches to toggle between Source and Destination to make as
many assignments as you wish.
The default patch is unassigned [---] for all RCV CTL destinations.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
[XMT CC] – Control knobs transmit MIDI Continuous Control
The default patch is as follows:
PDL>C15, KB0>C22, KB1>C23, KB2>C24,…,KB9>C31
XMT CC makes it possible to use TimeFactor’s Expression Pedal and Control Knobs as MIDI
controllers.
Here’s how it works:
Press the Encoder to select XMT CC. You will see two fields (split display) of the Billboard
display showing Control source and Destination assignments. An arrow pointing to the left
(Control Source) is flashing (if it’s not, press the Left Footswitch to select this field) showing
this to be the selected field for editing.
To Select the Control Source
Turn the Encoder knob to select the Control Source. The choices are:
PDL – Expression Pedal.
KB0…9 – Parameter Control Knobs
To Assign the Control Source to a Destination
Press the Right Footswitch to select the MIDI Continuous Control that will be assigned to the
TimeFactor Control Source. The choices are:
OFF – Control Source unassigned.
C0 - C99 - MIDI Continuous Controller from 0 to 99.
Press the Left and Right Footswitches to toggle between Source and Destination to make as
many assignments as you wish.
Press the Middle Footswitch once to back-up one level to MIDI menu.
Press the Middle Footswitch twice to go to top level System menu.
To Next Page
Loading...
