EasyManua.ls Logo

Everbilt J100A3 - User Manual

Everbilt J100A3
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
THANK YOU
We appreciate the trust and confidence you have placed in Everbilt through the purchase of this shallow well jet pump. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank
you for choosing Everbilt!
SKU # 1001187540, 1001187555
1000026697, 1000026692
Model # AUTOJ100A2, AUTOJ100A3
J100A3, J200A3
USE AND CARE GUIDE
SHALLOW WELL JET PUMP
Questions, problems, missing parts? Before returning to the store call
Everbilt Customer Service
8 a.m. - 6 p.m., EST, Monday-Friday
1-844-241-5521
HOMEDEPOT.COM

Table of Contents

Questions and Answers

  • K
    Kelly EdwardsJul 25, 2025
    What to do if Everbilt J100A3 Water Pump delivers water but does not shut off?
    • C
      Connie SmithJul 25, 2025
      If your Everbilt water pump runs continuously or cycles too frequently, several issues could be the cause. First, ensure all faucets are closed. A common cause is a waterlogged pressure tank lacking an air cushion; drain the tank to the air volume control port and inspect the AVC for defects, checking connections for air leaks. Other potential causes include a misadjusted or welded pressure switch (adjust or replace after disconnecting power), a clogged venturi, nozzle, or impeller (clean these components), leaky pipes (check connections), or faulty foot valves (replace them). Also, check the air charge in the pre-charged tank; after disconnecting power and relieving pressure, the air pressure should be at 28 PSI. Inspect the air valve for leaks and replace the core if needed.
  • K
    kjohnsonAug 3, 2025
    Why does my Everbilt J100A3 Water Pump not deliver water to full capacity?
    • M
      Mitchell RiceAug 4, 2025
      There are several reasons why your Everbilt water pump might not be delivering water to its full capacity. The water level in the well could be lower than estimated, requiring a deep well jet if the depth to water exceeds 25 ft. If you're using steel piping, corrosion or liming could be causing excess friction; replace it with plastic pipe where possible, or use new steel pipe. Insufficient pipe size can also restrict flow, so consider using larger piping. Lastly, the well point might be packed, requiring backflushing or sinking a new point.
  • K
    Kenneth LongAug 14, 2025
    What to do if Everbilt J100A3 has air spurts from the faucets?
    • J
      jeffreyingramAug 15, 2025
      If you're experiencing air spurts from the faucets with your Everbilt water pump, it could be due to several reasons. The pump might be picking up prime; once primed, it should pump solid water without air. Another cause could be a leak in the suction side of the pump, where the suction pipe is drawing in air; check joints for leaks using shaving cream. If the well is gaseous, consult the factory about installing a sleeve in the well. Also, intermittent over-pumping of the well can cause this issue if the water is drawn down below the foot valve; lower the foot valve if possible, or restrict pump discharge.

Summary

Pre-Installation Guide

Application Requirements

Details the pump's intended use and operational parameters.

Tools and Materials

Lists necessary tools and materials for installation.

Package Contents and Specs

Lists included items and provides technical specifications.

Pump Installation Procedures

General Installation Guidelines

Covers basic setup, safety warnings, and pump body considerations.

Shallow Well and Well Point Installation

Details specific requirements for shallow well and well point installations.

Cased and Surface Water Installation

Explains installation for cased wells and surface water sources.

Discharge Pipe and Tank Connections

Pre-Charge Tank Connection

Details how to connect the pump to a pre-charged pressure tank.

Standard Tank Connection

Explains the setup for a standard tank connection with AVC.

Pressure Switch and Voltage Setup

Wiring the Pressure Switch

Provides instructions for connecting the power supply to the pressure switch.

Adjusting Voltage Settings

Guides on how to select between 115V and 230V operation.

Priming and Winterizing

Pump Priming Procedure

Step-by-step instructions for filling and starting the pump.

Winterizing the Pump

Steps to prepare the pump for freezing temperatures.

Troubleshooting Common Issues

Motor Not Running

Addresses causes and solutions for when the motor fails to start.

Motor Overheating

Explains why the motor runs hot and the overload trips.

No Water Delivery

Covers issues where the pump runs but delivers no water.

Low Capacity or Frequent Cycling

Addresses problems with reduced water output or pump cycling.

Everbilt J100A3 Specifications

General IconGeneral
ModelJ100A3
Power SourceElectric
Thermal ProtectionYes
Discharge Size1-1/2 in.
Voltage115V
Outlet Size1-1/2 in.

Related product manuals