15
The following things should be checked before starting the dishwasher.
Before Starting the Dishwasher
1 The dishwasher is level and fixed correctly into position
2 The water inlet valve is open
3 There is no leakage at the hose connections
4 The power is correctly connected & turned on
5 The spray arms can move freely
6 The inlet and drain hoses are not knotted and drain hose outlet is not blocked
7 All packing materials and printings have been taken out from the dishwasher
8.Troubleshooting Tips
WARNING!
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
n
n
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Overflow.
Codes
Issue
Possible Causes
Longer inlet time.
Tap is not opened, or water intake is restricted,
or water pressure is too low.
The Rapid light
flickers fleetly
The Normal light flashes fast
Dishwasher leaking.
Technical Information
850
600
600
11
95
Height : 850mm
Width : 600mm
Depth : 600mm
Voltage connected Load : see rating label
Water pressure: 0.04-1.0MPa
Power supply: see rating label
Capacity: 14 Place settings
To Next Page
Loading...
