2
TABLE OF CONTENTS
SPECIAL NOTICE AND CALIFORNIA PROPOSITION 65 WARNING 3
CUSTOMER GREETING AND EXPLANATION OF PROCEDURES 4
WARRANTY AND CONTACT INFORMATION 5
SAFETY DISCLAIMER AND HF WARNING 6
SAFETY WARNINGS, DANGERS, CAUTIONS AND INSTRUCTIONS 7
GENERATOR OPERATION INFORMATION 10
SPECIFICATIONS 11
DUTY CYCLE INFORMATION 11
BREAKER AND WIRING REQUIREMENT INFORMATION 12
GETTING STARTED, UNPACKING YOUR UNIT AND INSPECTION 14
CONNECTING YOUR UNIT TO THE POWER SOURCE AND WIRING INFORMATION 15
SHIELDING GAS CONNECTION AND SELECTION 16
SELECTING POLARITY AND INSTALLING TORCHES 17
INSTALLING THE MIG WIRE AND SPOOL GUN CONNECTION 19
FRONT PANEL VIEW AND COMPONENT ID 21
REAR PANEL VIEW AND COMPONENT ID 22
CONTROL PANEL LAYOUT 23
GETTING READY TO WELD 24
SETTING UP THE UNIT FOR WELDING MANUALLY 25
SETTING UP THE POWERSET MODE 28
EXPLANATION OF MIG FUNCTIONS AND TERMS 30
MIG TORCH COMPONENT BREAKDOWN 34
STICK WELDING INFORMATION 35
TROUBLESHOOTING ERROR CODES 37
TROUBLESHOOTING COMMON MIG WELDING ISSUES 28
To Next Page
Loading...
