29
ENGLISH
10.6 PRE-COOLING CYCLE:
The purpose of the pre-cooling cycle is to lead the cell to a defined temperature before selecting and
starting a retarded proofing cycle.
Once the pre-cooling temperature is reached , the buzzer sounds in an intermittent manner indicating
that the machine is ready to perform a cycle.
The pre-cooling cycle goes on running until the START/STOP key is pressed or up to the starting of
an automatic or manual cycle.
► Press key PRE-COOLING (10)
10
► Press the - and + keys (8-11) to modify the
temperature
► Press the START/STOP key (5) to start the
PRE-COOLING cycle
Pre-cooling
-5 °C
Start
► The display will show a flashing white triangle
on the PRE-COOLING icon (10)
The cycle may last until you start a program. When
the defined temperature is reached an acoustic si-
gnal will sound.
► To cancel the PRE-COOLING cycle hold the
START/STOP key (5) pressed for more than 5 se-
conds.
10
5
To Next Page
Loading...
